|
IP phonesThe innovaphone PBX range of IP phones has grown steadily and is being constantly extended and adapted. IP phones have been made to cater for any imaginable situation: for switch boards, for managers, for intensive usage or to be wall mounted in corridors and workshops. The special IP phone IP150 has been especially optimised for usage in rough environments. Click on the relevant IP phone below for more details.
The system telephone IP240 is the new flagship product in the range of telephones for the innovaphone PBX. It joins the long standing optimized features of the classic IP200 with the modern hardware of the IP230 to form a mature and high quality terminal. IP240-1000 is the equivalent phone with a Gigabit-Ethernet interface. The IP 230 is one of the most powerful system telephones in the innovaphone PBX. This IP phone features a concise user guide on the 7-line display. There are ten direct-dial keys in addition to the feature keys next to the display. These direct-dial keys can be used for quick dialling, pickup and status indication. Each attachable extension module extends the number of direct-dial keys by 30. The IP200 is a further IP system telephone for the innovaphone PBX. The large 7-line display and especially the alpha-numeric keyboard enable simple and quick use of the dial-by-name feature. The IP110 telephone supports all modern IP phone features. The 7-line display indicates actual status and operation possibilities. The 4 feature keys can be programmed freely as direct-dial keys for quick dialling, pickup and status indication or for other features. This IP phone is set to be wall mounted. innovaphone also has an IP phone suitable for use in harsh climates. The IP150 is perfect for use in workshops or outdoors thanks to its weather proof housing which is also protected against vandalism. IP151 is the version for use in areas with explosive atmospheres of Zone 2. Softwarephone (from V7) Bria is the most recent sofware phone application from innovaphone and runs only with firmware V7 and higher. It connects voice and video over IP in one application. The user interface is intuitive to use and its wide array of individual settings and possibilities results in improved use for occasional users as well as for professional users.
The power supply for every IP telephone can use Power over LAN according to the IEEE 802.3af standard, thus using less than 4 watt. They are optimised for operation on the innovaphone PBX. The IP telephones support the two most important VoIP protocolls H.323 and SIP. Multiple registration enables these to be used simultaneously on the telephone. |
