Leaflet for the Devices IP0013 & IP6013

For more detailed information on functions, features and technical data, please refer to the respective websites:


Delivery Contents

  • End device IP0013 / respectively IP6013
  • Accompanying document with QR code

Technical Data

Power supply PoE+ according to IEEE 802.3at, class 4
Operation temperature: 0 °C to +45 °C
Storage temperature: -10 °C to +70 °C
Humidity: 10% to 90% (non-condensing)

Intended Use

These devices are suitable for connection

  • to Deutsche Telekom AG’s ISDN network or other technically comparable networks according to the harmonized European standard CTR 4
  • to the innovaphone PBX or SIP server or technically comparable systems according to the international H.323 or SIP standards

The existing interfaces may only be used for appropriate purposes as follows:

Symbol Use
PRI 1…PRI 4 RJ45 (modular jack 8P8C) connector for ISDN primary multiplex interface
ETH0, ETH1 RJ45 (modular jack 8P8C) connector for Ethernet (LAN)


Please click here to view our quick installation guide for innovaphone gateways and analog adapters.

Pinout for PRI Interfaces

PIN Pinout
PIN 1 Receive +
PIN 2 Receive -
PIN 3 TX +
PIN 4 TX -


Contact the specialist dealer in case of warranty. Improper use voids warranty.

Serial Number

The serial numbers and the hardware versions for these devices can be found underneath the respective device.

Please Note: Important Note Regarding Provisioning!

These devices can send data to innovaphone. The settings can be changed to prevent this. The data is processed according to the innovaphone privacy policy.

For further information: www.innovaphone.com.

Errors and omissions excepted. Technical specifications and delivery times may be subject to change.

Declaration of Conformity

The company innovaphone AG, Umberto-Nobile-Straße 15, 71063 Sindelfingen, Germany, declares its sole responsibility that the products below comply with the basic requirements and other relevant provisions of the EMC directive 2014/30/EU and the RoHS directive 2011/65/EG when used properly. The following standards have been applied:


  • innovaphone IP0013 VoIP gateway (article no. 01-00013-001)
  • innovaphone IP6013 VoIP gateway (article no. 01-06013-001)

Directives and Standards Applied:

  • EN 55032:2015
  • EN 61000-4-2:2009
  • EN 61000-4-3:2006 + A1:2008 + A2:2010
  • EN 61000-4-4:2012
  • EN 61000-4-5:2014
  • EN 61000-4-6:2014

Sindelfingen - March 28th, 2022
Carsten Bode - Head of Development

Carsten Bode
    Notice on Cookies

This website uses cookies to provide you with an optimal website experience. This includes cookies that are necessary for the operation of the website, as well as cookies that are only used for anonymous statistical purposes or for convenience settings to display special content. You can decide for yourself which settings you would like to allow. Please note that not all functionalities of the website might be available, depending on your settings. If you accept all cookies, you will have full access to all the services of our website. For further information, please read our privacy policy.